Re: [TR] Re: TR6 door handle window crank retaining pins

[Jim <cartr4a@ameritech.net>]

I use a small punch and go 1/2 way through the hole from the bottom, then 
insert the pin with needle-nosed pliers from the top.  Once the pin is 1/2 way 
in, just pull out the punch and tap the pin home.   
  Jim
  '67 TR-4A
  '68 GT6
  http://www.geocities.com/britishiron2000



fogbro1@comcast.net wrote:
  List,

Any trick to installing the pins that retain the window crank and door handles 
on th TR6? Has anyone made a tool that will assist in their installation?

Thanks,

Ed Woods


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org