Hi Bob,
If my memory serves me correctly, I bought about 4 rolls of the stuff, did
quite a bit of wrapping and ended up with a roll and a half or so left. I would
buy about 5 rolls, then buy a package of the connectors, single and double to
replace the worn out ones and that should get you over the $20 minimum. Of
course it really depends if you are going to re-wrap the whole harness. There
are a lot of little runs the wires take that need to be wrapped first before
doing the entire harness. Those can take up quite a bit. But I suspect you
would have enough and if you found yourself running low you would probably have
enough time left to order some more before you would need it.
My two cents.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
Topsham, Maine
-----Original Message-----
From: 75TR6@tr6.danielsonfamily.org
To: triumphs@autox.team.net
Sent: Tue, 29 Aug 2006 3:44 PM
Subject: [TR] Wire Harness Tape
Does anyone have any idea how much tape it takes to wrap a TR6 wire harness?
British Wiring sells a 20 meter roll for $3.00 but they have a $20 minimum
Visa order requirement. Moss sells theirs for $5.55 but I need to call them
and find out how many feet in their roll. So, How many feet of tape do I
need?
Thanks
Bob Danielson
1975 TR6
http://tr6.danielsonfamily.org
________________________________________________________________________
Check out AOL.com today. Breaking news, video search, pictures, email and IM.
All on demand. Always Free.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|