Thanks for the quick response. That was the answer. I broke my own rule of
RTFPW.
-------------- Original message ----------------------
From: "Randall" <tr3driver@comcast.net>
>
> > I am taking the timing cover off, so I need to remove the fan hub
> > extension. I have removed the 4-blade fan and undone the 6 bolts
> > from the extension to the main pulley/crank. The pulley is
> > moving loosely, but the extension is solid. Before I apply too
> > much "assistance" with a hammer and soft drift, have I missed anything?
>
> Sounds like you missed the big bolt with the handcrank dog as it's head.
> With that out of the way, the extension and pulley halves should fall off.
>
> Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|