On Saturday 29 July 2006 11:06 pm, lbc.resto@comcast.net wrote:
> I have the rear brake cylinders apart. They are both Girling but with
> different idents, so I presume that one was replaced previously. My manual
> shows that the Girling doesn't have a spring behind the piston whereas the
> earlier Lockheed does. However, one cylinder has a spring and the other
> doesn't. I don't know if the spring is a correct modification, or a
> mistake. Can anyone shed any light on this.
>
> Thanks.
Ian,
No springs on any TR3 or TR4 I have worked on. It is either a mistake or the
wrong cylinder.
Bob
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|