Hello all,
Tried bleeding my brakes today on my path to putting everything back together.
Turns out this one caliper rebuild was apparently damaged when drilling out
the rusted solid bleeder valve. The new valve locks down tight but fluid (DOT
5 -thank God) comes right out of the hole. I must have drilled right through
the casting. The other seems fine, same problem in the rebuild. Well it now
appears I need to locate a driver side caliper with a cross over pipe. If
anyone has a spare that they are willing to sell, please contact me off list.
TIA
Alex Manzo
ambritts@ptd.net
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|