To: | <triumphs@autox.team.net> |
---|---|
Subject: | [TR] Another electrical question: TR3A gear reductionstarter |
From: | "Terry Smith" <terryrs@adelphia.net> |
Date: | Sun, 25 Jun 2006 11:45:14 -0400 |
Hello, everyone. Turning on the ignition and pushing the starter button buys me a "click." When I bought the gear reduction starter (negative ground) from TRF, Dave mentioned to run a wire from the battery post to the connecter that is, I think he said, on the solenoid. But that's where the starter button wire goes. Meanwhile, there's nothing attached to the little spade connector on the starter itself. Am I missing something...other than grey cells? Terry Smith, '59 TR3A New Hampshire === This list supported in part by The Vintage Triumph Register === http://www.vtr.org |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TR] Electrical Gremlins: New TR3 Wiring Harness, Geo & Kathleen Hahn |
---|---|
Next by Date: | Re: [TR] Retrofitting a dual circuit brake master cylinder to a, emanteno |
Previous by Thread: | [TR] Retrofitting a dual circuit brake master cylinder to a TR4A, Dave Connitt |
Next by Thread: | Re: [TR] Retrofitting a dual circuit brake master cylinder to a, emanteno |
Indexes: | [Date] [Thread] [Top] [All Lists] |