-----Original Message-----
>From: Ray Tedder <rtedder101@cox.net>
>Subject: [TR] TR6 Hardtop Questions???
edited
>1) When installing the hard top to rear deck seal, the one that fits
>in the channel, the lip apparently goes toward the rear. Is that correct?
No, the lip goes to the inside on the used original that I have.
>2) When installing the side seals, the flat side apparently is glued
>to the hardtop so that the lip points to the outside. Is that correct?
The side seals are missing. I would assume that the lip would be to the inside
due to the orientation of the rear seal.
>3) The clip used to secure the trim strips is attached with a 1/8" pop
>rivet; should the nose piece fit inside the clip? What size should be used?
>
The rivets for the trim are 5/16" in diameter for the head portion.
> Even the 1/16" doesn't fit inside the clip.
>
>Thanks
>
Your welcome,
Greg Perry
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|