of course my "new" 1979 tr7 that i got on ebay is not quite as "perfect" as
the seller stated. let the laborious restoration begin. i need a ton of
parts, the most pressing the plastic reservoir on the top of the brake
master cylinder. to replace the one the seller patched with brown silicone
rubber for the hole in the side of it. if any of you have parts, i also
need, good ignition switch, window crank hardware for passenger door, rotors
& pads (new), hardboard for interior of trunk, etc. etc. etc. thanks, larry
stein
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|