> If I'm not mistaken (and I could be) I thought the big end of the driver's
> side boot was secured with wire and a twist... not a clamp. Rather like
> the wire fixing the rear axle buffers on a solid axle car. Zip ties will
> surely work but the wire is just as easy and available and may even be
> correct.
Or one could do it *properly* as we did in both factory owned and run
Service Divisions by using jubilee type worm drive clamps. The wire, while
arguably practical, had a similar effect on the steering gaiters as those
wretched bent wire hose clamps that knackered hoses in no time at all.
My two pence worth
Jonmac
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|