> > They are not threaded. They are a knurled fit.
>
>Not so, the rear studs on TR2-4 ARE threaded. However, they are also peened
>into the hub from behind, so it's generally necessary to grind away the peened
>area before unscrewing them. Unfortunately, you need to remove the
>hub/halfshaft from the axle housing.
>
>Be sure you peen the new ones in securely. Or, as another
>alternative, you can
>supposedly buy a fully-threaded stud and thread it in from the back, removing
>any concerns over the stud coming out of the hub.
>
>Randall
Interesting! Anyone know where you could buy fully-threaded studs?
I re-did my own rear studs but I'm a novice and would feel better
about driving the car in a spirited fashion if I had the ful--length
studs in instead.
Dan
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|