> Yep, I got the idler arm out with the pin still in it. Got the pin seperated
> from the idler arm easily enough with out of th ecar, but now how do I get
> the pin back in? I figure I can replace that washer with one of those slide
> on washer things if I can get it back in.
The pin is _supposed_ to be bonded to the rubber in the silentbloc ... once
you've removed it this way there is no choice but to replace the silentbloc.
That may be easiest if you also remove the center link from the car, but that
generally involves tearing the other silentbloc apart as well ... since both of
mine were ruined, I didn't try doing just one with the center link still on the
car.
Of course it would be even easier with the body off the frame ... but so far
I've resisted taking that step !
:)
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|