I was going though old sets of spark plug wires from my TR6 and was
looking at the resistor ratings. I have some that are just copper core
with 0 resistance, some of the older repro sets from TRF that say 16K
but measure out at more like 4K. I also have a NOS set of Ripaults that
say 15K and measure exactly that, and another repro set from an unknown
source that says 25k Ohms. I cant find what should be correct for my
76. I've used the copper core set(0 ohm) with no noticable radio
interference. Would this be the best set for performance or does it
really make any difference. Thanks for any insights. John Mitchell
76 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|