> having disconnected everything properly and removed the rear
> springs, is it
> possible to remove the rear axle from my TR3A. 10" brakes. don't
> wish to pull
> off the drums and back plate assembly if I don't have to. it looks kinda
> tight as I stare at it.
Unless the body is off, you will have to remove one drum & backing plate to
get the axle out. It's easiest to remove both of them IMO but I have seen
it done the other way.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|