TR3 Timing

[John Wise <JohnWise@alumni.pitt.edu>]

I know that the "official" way of setting the timing on a TR3 is to 
set the engine 3/8" from TDC and then adjust the distributor until a 
light, that is connected the  distributor  terminal and any 
convenient ground illuminates.

What I would like to know is where the flywheel should be using a timing light.

John
-- 
John A. Wise, Ph.D., CPE
Glendale, AZ

JohnWise@alumni.pitt.edu
http://home.earthlink.net/~johnwise/


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org