A year or two ago I purchased a rear hub puller that was made by someone who
had copied the churchhill tool.
I have seen the church hill tool at TRF.
I had brought mine to a machine shop to see if they could take apart a hub.
He used an air wrench on it and could not get the hub to release.
I thought at TRF they used a very large socket wrench or torque wrench.
Is anyone familar with this copy, and what have they used to put enough
pressure on it, to get it to work.
thanks
al salvatore
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|