Re: bead blasting

["Kentech Home Technology" <kentech@midmaine.com>]

.Black beauty is good stuff.
 
Also be sure the water separator is on the blast cabinet end, not the
compressor end of the blasting hose, or else it won't work removing
moisture. This is one of the most common mistakes installing separators.
 
Might also want to check the tip on your gun to make sure that it's
tight, orifice is not too big, and the seal where it fit's into the gun
is intact and not letting air bypass.
 
PeterK


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org