RE: 3a mystery washer/shim

["Randall" <tr3driver@comcast.net>]

> On re-assembly I find on the floor a washer that
> <snip> It's i.d. is .875" and its o.d. is 1.166". It's
> thin, like about 0.017".

Sounds to me like one of the shims that go under the head of the front crank
bolt, to set the handcrank angle relative to TDC.

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org