----- Original Message -----
To: <triumphs@autox.team.net>
Sent: Saturday, October 29, 2005 8:43 PM
Subject: Re: Tenax Question
When replacing any of the ten Tenax studs above the windscreen on a side
screen car be sure that the replacement stud is the exact same length as the
original. Even a few extra mm longer may go through the rubber and into the
glass. If the stud touches the glass it will crack the glass which will
definitely ruin your day.
Lou Metelko
Auburn, Indiana
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|