triumphs
[Top] [All Lists]

Re: Fwd: RE: Aluminum front hubs

To: "Jack W. Drews" <vinttr4@geneseo.net>, fot@autox.team.net,
Subject: Re: Fwd: RE: Aluminum front hubs
From: Raymond Hatfield <iron_horse819@yahoo.com>
Date: Fri, 14 Oct 2005 06:24:26 -0700 (PDT)
I have a question:  How safe are the original hubs?  Let me clarify - I'm
rebuilding a TR4A that I plan to drive (almost)daily.  I live in the country
and have a 1 hour commute over relatively twisty, windy roads (which have been
known to see speeeds up to 80 mph) to get to my job.  Furthermore, I would
probably participate in autox or other type events at conventions.  Do I need
to be concerned, or are the stock hubs strong enough in this situation?

TIA,

Raymond

--- "Jack W. Drews" <vinttr4@geneseo.net> wrote:

> >Date: Fri, 14 Oct 2005 01:09:47 -0500
> >To: Bill Babcock <BillB@bnj.com>
> >From: "Jack W. Drews" <vinttr4@geneseo.net>
> >Subject: RE: Aluminum front hubs
> >
> >Watch where you step -- don't get in the marbles.
> >
> >Southwick makes the hubs, Weatherly the axles.
> 
> 
> By the way, I should have given a further explanation.
> 
> These are the hubs shown in the photograph in Kastner's book. 6061 
> aluminum, CNC machined,stud sizes your choice of length and diameter, 
> new Timken bearings (last almost forever), lip inner seal, new dust 
> cap. These hubs were specifically designed to eliminate weaknesses in 
> the hubs under racing conditions. They are not particularly lighter 
> than the stock hubs, but they are very strong, eliminating the 
> necked-down portion where front hubs break. The inner bearing is a 
> larger, heavier duty bearing. In four seasons of racing, the grease 
> in my inner bearings has not failed and not needed replacing, even 
> under racing conditions, something you can't say for the stock inner
> bearings.
> 
> 
> >At 08:51 PM 10/13/2005, you wrote:
> >>I'm definately loosing my marbles. Didn't Mark Weathers do aluminum hubs
> >>along with the modified stub axles? I'd go for another set of those,
> whoever
> >>makes them.
> >>
> >>-----Original Message-----
> >>From: owner-fot@autox.team.net
> >>To: fot@autox.team.net; triumphs@autox.team.net
> >>Sent: 10/13/2005 5:25 PM
> >>Subject: Aluminum front hubs
> >>
> >>I'm going to try to persuade Bob Southwick to make another run of
> >>aluminum front hubs. To make my pitch more effective, if you are
> >>contemplating trying to get a set of these, please email me back so I
> >>can give him a good quantity.
> >>
> >>Thanks
> >>
> >>uncle jack
> >
> >uncle jack
> 
> uncle jack 



                
__________________________________ 
Yahoo! Music Unlimited 
Access over 1 million songs. Try it free.
http://music.yahoo.com/unlimited/


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org


<Prev in Thread] Current Thread [Next in Thread>