Paul,
I've CAREFULLY used air in the bleed hole to force out the piston. You may
have to soak it for a period of time - days, weeks, months in PB blaster or
some other lubricant, or brake fluif,for it to work. Again, carefully with
the air.
Tom
----- Original Message -----
From: "Paul Dorsey" <dorpaul@negia.net>
To: "triumph list" <triumphs@autox.team.net>
Sent: Sunday, October 09, 2005 5:02 PM
Subject: slave cylinder needs mastering
> I am rebuilding clutch slave cylinders. I have one Lockheed and one
Girling
> type. The Lockheed is 1 1/8" bore and the Girling is 1" bore (I think).
How
> do I secure the Lockheed piston inside the Lockheed SC when there is NO
> groove for a circlip?
>
> Can I use the Lockheed SC on my '60 TR3A which I think originally was
> Girling? You see, my Girling SC's piston is stuck inside of it!
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|