The hood-bumper pins on my 250 are replacements, with a longer bolt that
stock, I think. The bottom of that left-hand bolt is less than 1/4" from
the top of my wiper motor. I had intermittent wipers a couple of years
ago; that is to say that they came on for the occasional swipe when the
interior switch was off. It was the top of the wiper motor mechanism
grounding on that hood bumper bolt. Take a look there and see if you
need more clearance.
Pat Fischer
Steinman, Bill wrote:
>1. On my drive into work this morning, the windshield wipers started
>turning on intermittently. I could get them to shut off by toggling the
>switch down. The switch sometimes doesn't work when I push the top to go
>right to the fast speed. I usually have to push the bottom to start on
>the slow speed, and then push the top of the swtich to get them to go
>fast. Short? Switch going bad?
|