Bill,
You may be able to pop the wiper switches out, but be VERY careful with
them...i bumped one with a screwdriver once & the thing EXPLODED...i wasn't
very happy!
You can pull the rheostat by pulling the speedo & rev counter...this will
allow you to "rock" the dash outward...I can't guarantee that you'll be able
to get the the screws that hold it in, but I guess it's worth a shot. Might
be better to get the switches out that way.
Be aware...the rheostat knob may fight you...it does NOT have a pin that
holds in on, but it's a bear to get off.
IMHO, it's easier to pull the dash for all that stuff.
Todd
From: "Steinman, Bill" <wsteinman@pogolaw.com>
Reply-To: "Steinman, Bill" <wsteinman@pogolaw.com>
To: <triumphs@autox.team.net>, <owner-triumphs@autox.team.net>
Subject: TR250 Electrics
Date: Tue, 30 Aug 2005 11:29:20 -0400
Thanks to everyone for the great advice. I did indeed order a copy of
the Dan Masters book, which actually arrived last night! Excellent
timing. What a wonderful read.
One more quick question: When removing switches and the rheostat, can I
remove them with the dash in place?
Many thanks again!
Bill Steinman
TR250 CD8464L
NOTICE: This communication may contain privileged or other confidential
information. If you are not the intended recipient, or believe that you have
received this communication in error, please do not print, copy, retransmit,
disseminate, or otherwise use the information. Also, please indicate to the
sender that you have received this communication in error, and delete the
copy you received.
IRS CIRCULAR 230 Disclosure: Under U.S. Treasury regulations, we are
required to inform you that any tax advice contained in this e-mail or any
attachment hereto is not intended to be used, and cannot be used, to avoid
penalties imposed under the Internal Revenue Code.
Thank you.
|