> I've been driving the TR4 a bit around the neighborhoods, and I've
> been having some trouble with the bonnet release. If I hit a decent
> bump, the bonnet will pop open
It may not be the cable. Even if it is sticking, you should be able
to push it fully in.
The plunger (?) on the hood may be adjusted too short and not
captured fully by the latch. It is screwed into the hood and secured
by a lock nut (inside the spring). Mine has a slotted end so that it
is easy to turn with a screwdriver.
The plunger and spring may not be centered on the latch hole. This
assembly is attached to the hood with two bolts in slotted holes for
adjustment.
Then I'd go back and look at the cable.
Allen Hess
|