I don't know about the Goodparts aluminum mounts but I purchased and
installed the aluminum mounts that use the U-bolts on my TR6 about 5
years ago. A few months later I happened to discover that one of
them had cracked and broken in the groove for the u-bolt, which was a
bit frightening, so I went back to stock.
This past weekend I installed a quick ratio rack from Moss Europe
that has the aluminum mounts. There is a world of difference in the
construction of the mounts and I'm not concerned about them breaking.
Rob
74 TR6 daily driver
At 6:56 AM -0400 8/1/05, John Cohen wrote:
>Hi,
>
>Is there any difference in quality or effectiveness between the Goodparts
>aluminum rack mounts with the Allen heads top & bottom and the other style
>of alloy mounts I've seen for sale with the U-bolt that goes over the rack
>and gets tightened up only from below. The latter would appear easier to
>install.
>
>
>
>John Cohen
>
>76 TR6
|