In a message dated 7/8/2005 1:45:26 PM Central Standard Time,
75TR6@tr6.danielsonfamily.org writes:
> Dave,
> My bad.... I paraphrased, figuring people would go to the link and read what
> VB wrote in their instructions. What they actually start out saying right up
> front is: "separate the left and right hand seat foams AND SEAT COVERS as
> they are slightly different". One difference is the hole for the release
> handle but if the foam is different, wouldn't it follow that the covers are
> different to correctly fit the foam? You probably can mix them up but the
> quality of fit may not be the best. I also seem to recall that the left and
> right seat frames are slightly different too....but it's been many years
> since I did this and the "senior moments" are coming more frequently now :-)
>
Well, if you want perfect, I guess so. But we are talking about a Triumph
here. And since the foam compresses and the vinyl can be tucked and pulled, it
can be made to work and be better than the tired, 30 year old stuff that is
there at the moment.
Most of the differences between the frames is due to mirrored latches and
rake adjusters.
Cheers
Dave
|