> Sorry for this second post...but someone has got to know what's an
> acceptable door gap for a TR3A. Is it the same for the bottom of the door
> as it is for the sides of the door?
>
I just measured mine, and it varies between 1/8" and 1/4", with most gaps
averaging around 3/16". The greatest variation was at the curved part of
the front of the doors, where the gap varied from 1/8" to 1/4 throughout the
arc. The bottom gap was similar to the gaps at the sides.
As Johnmac has pointed out in the past, they were never that accurate, even
when new!
Michael Marr
1960 TR3A
Naperville, IL
|