-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net] On Behalf Of sujit roy
Sent: Thursday, June 16, 2005 3:31 PM
To: Triumph List
Subject: addign an oil pressure gauge
Hi Guys;
I have an oil pressure gauge fitted to my '71 Stag. The oil pressure
sensor has been removed. I'm interested in having both. I've been
told that installing a tee is not a good idea as they can
break.(unclear why) However, I noticed some MGB's have a tee piece
that is bolted to the fire wall. One end, houses the oil pressure
sensor the other ends are for pipe attachments.
Where can I get this tee and other pipe and misc. fittings cheaply in
the US? I was at the Dixon car show and had the opportunity to buy a
used tee, but didn't. Stupid me.
That is what I did on my Spit. I took the idiot light unit to a
hardware store and mated it up to a short extension pipe that I then
mated to a "T" connector into which I fitted the Sender and mechanical
gage line into. Works great.
Joe
|