I have had no problems with either the TR3 or the TR4, but they don't get
driven very heavily, either.
Tom
----- Original Message -----
From: "John A. Wise" <JohnWise@alumni.pitt.edu>
To: <triumphs-digest@autox.team.net>
Sent: Friday, May 20, 2005 1:40 PM
Subject: Electric radiator fan attachment
> I was back at the radiator shop yesterday getting a spare "bung" to
> take to the NAPA store to be sure I get the correct sized electric
> fan switch. While we were talking he suggested that if I were using
> an electric fan fan that I not use the plastic "wire wrap type" that
> go through the radiator fins, but rather bring it back & he will put
> some metal attach points on the radiator structure.
>
> His argument was that over time the bouncing will loosen the fins &
> maybe damage the tubes. I still have the front apron off the car so
> it would only take a few minutes to remove the radiator & run it over
> to his shop.
>
> His logic seem reasonable, but I am wondering if it would be worth
> the hassle? Has anyone ever had trouble with the plastic after
> market mounting strips damaging their radiator??
>
> John
> John A. Wise, Ph.D., CPE
> Glendale, AZ
|