Paul,
According to the MOSS Catalog, the TR2-Some 4's used 9 3/4" free length
front springs. The MOSS part is 661-630.
Hope this helps.
Doug
At 01:25 PM 5/15/2005, you wrote:
>Don't ask me how I did this, but, I got 2 different spring compressors
>(both of them were tightened) STUCK while using it on one of my coil
>springs while I rebuilt my front suspension to my TR3! I did this while I
>had the coil spring off the car. The one internal coil spring compressor
>was wound tight so that it needed help from one external spring compressor
>which wound up with the head covered by the spring, or some such, I don't
>know, but, anyway with the use of a third spring compressor I was able to
>get them all free and my old spring came to life again (or so I
>think!). Luckily all my fingers are intact!
> The problem is now it seems shorter, but, I'm not sure! And the other
> spring is already mounted so I can't use it for comparison. And I had to
> leave it in the compressed state for two whole weeks while I searched for
> a way to fix it. According to some (misplaced) book, I remember that
> the other spring was the correct length before I mounted it. However,
> the now free spring is only 10 INCHES in length while uncompressed. It
> has NO spacers on it. Can someone please tell me what the correct length
> is suppose to be????????
>
>Thanks,
>Paul Dorsey
>60 TR3A
|