Paul,
On my TR6 the O-ring went around the dust cover on the outside of the
dust cover. I have attached a picture of what the ring looks like
placed on my calipers. Now, I have no idea if it is the same on a TR3.
Hope this helps.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
Topsham, Maine
-----Original Message-----
From: Paul Dorsey <dorpaul@negia.net>
To: triumph list <triumphs@autox.team.net>
Sent: Mon, 9 May 2005 21:52:29 -0400
Subject: TR3A Caliper brake rebuild
Hello!
I am about to rebuild the front Caliper brakes on my 60 TR3A. The kit
included dust boots, square-sholdered O-rings and a steel ring for each
brake. Where does this steel ring go? I believe the rebuild
procedure is
to lodge the new O-ring in the Caliper's piston hole then mount the dust
cover over this hole and insert the piston. Am I right?
Thanks,
Paul Dorsey
60 TR3A
[demime 1.01d removed an attachment of type image/jpeg which had a name of
IM001996.JPG]
|