Re: With/Without Manual's

[Don Malling <dmallin@attglobal.net>]

Don't see it in my copy -- which page?

Don Malling

Randall wrote:
>>The grease seal number for the TR3 REPLACEMENT Trunions is the same
>>seal number as is used for the
>>TR250 and TR6.
> 
> 
> There's a nice drawing in the Haynes TR250/6 manual that shows the seal
> orientation.  It also shows that the TR250/6 trunnion is machined to accept 
>the
> seal, but I know from experience that the TR3 trunnion is different.
> 
> Randall