> Brown is supposed to connect to green/brown going to the fuse box, BUT there
> is no green/brown wire at the fuse box, and the only green/brown off the
> harness at the switch goes to the flasher, and therefore connects to the
> signal switch. So where the hell does brown go!!!
Personally, I'd be tempted to connect the brown wire together with the
brown/blue. That will feed the flash-to-pass contacts with the same unfused,
unswitched supply that the headlights normally get.
Never did make any sense to me why the normal headlight circuit was unswitched &
unfused, but the flash-to-pass was both. Maybe someone at the factory noticed
the same thing, and deleted the extra supply wire.
Randall
|