> -----Original Message-----
> From: owner-triumphs@autox.team.net [mailto:owner-triumphs@autox.team.net]
> On Behalf Of Jeff Tedder
>
> Looking for suggestions for replacing the rear chrome capping piece that
> goes on the back of the hardtop center section for the 4/4A/250. It's a
> basic C-channel trim piece, with the C-part being about 1/2" wide.
Hi Jeff,
I'm not familiar with this application, but it sounds like the same profile
as the windscreen finisher on the Spitfire MkIV & 1500 (stainless on the
early cars, plastic later) and on most Herald Coupes. Of course in those
applications it was heavily formed around the screen outline.
I am assuming that what you need is basically a straight piece, originally
in stainless steel or anodised aluminium? If you can point me to an online
image of the section in place on the car, and ideally get a drawing of the
cross section through this, I will see if there's anything suitable
available in the UK.
Cheers,
Bill.
http://www.rarebits4classics.co.uk
|