Bill:
Mine was frozen up when I first got my '70 TR6 and had to use PB Blaster
over time, letting it soak in from the back side where the adjusting screw
is. Over time I was able to get it to move. Then retapped the threads and
got a new screw.
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
-----Original Message-----
From: owner-triumphs@Autox.Team.Net
[mailto:owner-triumphs@Autox.Team.Net]On Behalf Of Bill & Skip Pugh
Sent: Sunday, January 23, 2005 12:39 PM
To: 6pack@Autox.Team.Net; triumphs@Autox.Team.Net
Subject: Next Problem
The rear brake adjuster (passenger side) on the TR6 is "frozen" I
can't get it to turn in either direction, I am assuming I have to
remove the brake drum and try to free up what ever is causing the
jam. Is there any short cut that might help??
Thanks again for the Help
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
1971 TR6 CC59179L
aka
Rosey
Wallace, CA
|