> -----Original Message-----
> From: ZoboHerald@aol.com [mailto:ZoboHerald@aol.com]
>
> ========
> Bill, from what I can see in my Vanguard III SPC, the problem of
> compatibility might well lie in that spindle. The Vanguard uses a pulley
> with a mount for a fan, while the TR motors had the fan on the crankshaft.
> If the Vanguard fan pulley isn't compatible with a TR water pump's
> spindle, there's your problem (I suspect).
Thanks Andy,
The Atlas Major list shows the pulley, 101048, being common to the Vanguard
1-3, Sportsman, Ensign and TR2, but it won't be the first time that I've
found an incorrect cross reference in the factory lists :-(.
I may be able to obtain the seals and bearings to rebuild the original pump
- Plan B it is then,
Cheers,
Bill.
http://www.rarebits4classics.co.uk
|