My guess is that if you look closely you will find that the reservoir to
cylinder seal has gone bad allowing all of the fluid from the rear of the
reservoir to leak out and coat the joint between the cylinder and booster
making it look like that's where the leak is. Just a guess on my part. If
you feel under the reservoir only and at the back and get fluid on your
finger that would confirm a leak at that joint.
JVV
----- Original Message -----
From: <murray54@bellsouth.net>
To: <triumphs@Autox.Team.Net>
Sent: Sunday, January 02, 2005 7:33 PM
Subject: Brake Fluid Leak
> I have a leak where the master cylinder and the servo meet. All of the
fluid has drained out of the rear part of the resevoir only. Any ideas as
to the cause and the probable fix? I checked the bolts that hole the master
to the servo -- they're tight. Thanks for any help.
>
> Rick Murray
> Lilburn, GA
> 75 TR6
|