After further review of the bracket situation and comments by Jeff Tedder ,
I realized that the rear brackets require change out also.
A list of brackets required to mount the front & rear bumpers:
Front, R/H & L/H Bumper support brackets
Front, R/H & L/H supports overrider to wheel arch
Rear, R/H & L/H Bumper outriggers
Rear, R/H & L/H Bumper inner support brackets
Rear, R/H & L/H Bumper outer support brackets
I also want to thank Steve Newell, Lenny Seidman, and Ted Schumacher for
your responses. I will probably need to get these parts from several of
you, unless someone has them all. I will contact you individually. I have
available the respective TR4A versions taken from my TR4A for trade or
sale. They are all straight.
Darwin
1965 TR4
> [Original Message]
> From: Triumph TR4 <triumphtr4@earthlink.net>
> To: <triumphs@Autox.Team.Net>
> Date: 12/20/2004 9:45:05 PM
> Subject: TR4 front bumper supports
>
> Having just completed mating my body to a refurbished TR4 frame, I noted
> that the front bumper supports, I had on my TR4A, will not fit on my TR4.
> Does anyone have a set for the TR4? If I had a torch and a pattern, I
> probably could modify the TR4A supports to fit, but it would be simpler to
> avoid this, if possible. If anyone is interested, I have many TR4A parts
> available from this conversion project. Let me know what you need, and I
> will let you know if I have it.
> Darwin
> 1965 TR4
|