Hi Todd,
> Almost finished with my interior and I'm looking at my sunvisors and
> the big
> 3's catalogs.
>
> What has anybody used for a 67TR4A, it seems there is nothing
> available or
> maybe I'm reading them wrong,
I found a old pair, and had them recovered (about $30 at an upholstery
shop). TRF and Victoria both sell the TR6 kit as a replacement, but
that appeared to involve more mods to the windscreen frame than I was
willing to make.
> also what is the trick for remounting the top
> after you can't get at the nust in the bodywork.
I assume you mean where the top frame brackets mount to the b-posts?
One thing is to make sure you have the original, pointy screws, or
grind points on the ones you are using. For the lower two screws, they
share a common plate, so you can use an awl in one hole to move the
plate around while you try to get the other lined up.
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|