Art,
I'd err on the side of caution and rebuild with a new kit. You don't
want to skimp on anything as critical as your brakes.
Joe
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net] On Behalf Of McEwen, Art
Sent: Sunday, July 25, 2004 11:21 AM
To: 'triumphs@autox.team.net'
Subject: Wanted: brake fluid safe sealant
Hi,
When tracing a leak from my brake reservoir I noticed the fitting
between
the inner and outer can was loose (TR3A link to pic below). I took it
apart
to clean it and found the rubber seal between the cans was badly
deteriorated.
I can probably make a new gasket out of blank rubber but I'll probably
get a
better seal with some sort of gasket-in-a-tube, I'm running DOT5
silicone
fluid so would a silicone based compound be safe?
http://home.cogeco.ca/~amcewen2/explode3.jpg
<http://home.cogeco.ca/~amcewen2/explode3.jpg>
Many thanks
Art
|
