triumphs
[Top] [All Lists]

Cam/Crank wheel Q 6.26.0.3; VDF: 6.26.0.18; host: imx2.tcd.ie)

To: triumphs@autox.team.net
Subject: Cam/Crank wheel Q 6.26.0.3; VDF: 6.26.0.18; host: imx2.tcd.ie)
From: John Gillis <jgillis@gemini.tcd.ie>
Date: Thu, 8 Jul 2004 09:49:27 +0100
I have a NOS unmarked Cam wheel and a very good second hand crank 
wheel for my engine rebuild. Do I really need to go through the 
procedures in the workshop manual for un marked wheels to set up the 
valve timing or is it safe to just copy the position of the marks on 
the original wheels over to the new ones and use these to establish 
the correct layout.
John
-- 
John Gillis
1954 TR2 TS3618. October 1954 (ground up)
2001 Kawasaki W650
Trinity College
Dublin,
IRELAND.





<Prev in Thread] Current Thread [Next in Thread>