Message text written by "Creig & Kay Houghtaling"
>I helped my friend rebuild his TR7 carbs. This is the 4th Zenith rebuild
that I have done. So I don't think I have missed anything on the rebuild.
But after we got everything back together I can't get the engine to idle
down lower than about 2 to 2.5 grand. (High idle was not an issue before
the rebuild.)<
Creig, do these carbs have the poppet valves on the throttle plates or the
separate over-run valves on the side of the carbs a la TR6 carbs? Either
way I'd check there next.
Dave
|