triumphs
[Top] [All Lists]

Re: Replacing Pinion Seal in Differential

To: triumphs@autox.team.net
Subject: Re: Replacing Pinion Seal in Differential
From: "J.C. Hassall" <jhassall@blacksburg.net>
Date: Fri, 30 Jan 2004 20:01:33 -0500
At 10:47 1/30/2004 -0500, you wrote:
>My differential is covered with amazing amounts of oil and muck from what
>appears to be a long-leaking pinion seal.  Given that I have removed my 
>springs
>for refurbishing, I'm thinking now is the time to address the seal.  Is it
>possible to replace the seal without withdrawing the axle and differential 
>from
>the car?  Any tips for how to get this job done efficiently, or things to 
>look
>for?
>
>Many thanks!

A method which has worked for me is to thread a #8 or #10 self-tapping 
screw into either side of the seal, them carefully lever it out.  Not 
trivial, but the method works.  And sure beats pulling the diff apart.

hth

Jim


--
Jim
jhassall@blacksburg.net
Blacksburg VA
'63 TR4 in autox preparation, 90% finished, 90% to go 





<Prev in Thread] Current Thread [Next in Thread>