triumphs
[Top] [All Lists]

Re: 13/60 Vitesse Clone

To: "Chris De Wet" <DeWetC1@sapo.co.za>, "jim williams" <sportsix63@yahoo.com>, <triumphs@autox.team.net>
Subject: Re: 13/60 Vitesse Clone
From: "William Davies" <bill@rarebits4classics.co.uk>
Date: Wed, 5 Nov 2003 10:56:47 -0000 hA5AxfEA024944
Cc: <spitfires@autox.team.net>
References: <5253ABB4D7C7D611A3420008C74C5D801F9670@NTNREXH1.sapo.co.za>
----- Original Message ----- 
From: Chris De Wet <DeWetC1@sapo.co.za>
> 
> I have been advised that the Vitesse/GT6 gearboxes are weak, prone to
> failure and troublesome. It WILL apparently fail if you put more than
> standard torque through it or drive in a 'spirited' fashion. It will not
> last with any performance increases. True/false ? Anyone any ideas or
> comments ?

WHile the gearbox is certainly weaker than the big saloon box, I know several 
owners of 2.5 litre engined GT6s who've not had problems with the standard 
gearbox. The diff on the other hand IS a problem, certainly the weakest link in 
the chain.

> Apparently 3.63:1 is "the best" diff ratio to use with the 2L GT6 engine and
> saloon o/d gearbox (possibly even with the standard Vitesse/GT6 o/d
> gearbox). Unfortunately I have no idea where one could obtain such a 3.63:1
> differential, but the guts from a TR7 four speed diff is 3.63:1 and could
> possibly be transplanted into a Vitesse/GT6 diff casing. Anyone any ideas or
> comments ?

The early TR7 axle is I believe essentially the same unit as used on the 
non-Sprint Doomites. If that's correct then the diff assembly is very similar 
to the later Spitfire type. From memory there is an additional fixing hole 
which needs to be drilled in the nose-piece (can't remember the specifics) but 
the internals are the same.
    Cheers,
        Bill.

--
Rarebits4classics
       .......just what you've been looking for

PO Box 1232
Calne
Wiltshire
SN11 8WA
United Kingdom
http://www.rarebits4classics.co.uk




<Prev in Thread] Current Thread [Next in Thread>