I was less meticulous than I should have been in
taking the engine out of my TR6. I thought I had the
booklet for the Allison ignition but apparently don't,
so I could use some help in setting the dizzy back up.
Here's what I can remember for the wires coming from
the box:
Red goes to coil "+"
Black goes to coil "-"
Purple goes to ground (like on the coil clamp)
The pinned connector goes to the dizzy.
I don't recall if any other wires went to the coil or
if any other wires went to the dizzy.
I also have no recollection of how to set the timing
etc. Any help would be greatly appreciated.
Thanks,
Steve
Racine, WI
__________________________________
Exclusive Video Premiere - Britney Spears
http://launch.yahoo.com/promos/britneyspears/
|