Tim wrote :
> I'm not sure about Mikes plumbing. All you need is a line
> from the radiator overflow to the bottom of the expansion tank. The
> line needs to be a heavier weight than the usual flimsy overflow line
> and make sure you clamp it at both ends-remember it's under pressure
> as well.
Hi Tim ,
I entirely agree with all you wrote .
I should have added that the next stage is to cut off the long neck with the
filler
and just leave a small bleed pipe on top of the rad . The lower pipe from the
header tank to the heater return T-piece will also be for filling the circuit .
Cheers
Mikehttp://perso.wanadoo.fr/kitchener
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|