Hi John,
I installed the 0.032 gasket from Gasket Works last year when I rebuilt
my engine. Fit was fine, no leaks that I can tell. The stock gasket
is around 0.060, so the 0.032 gives a small compression increase. I
used the spray-on gasket sealer that they sell. I used a sanding drum
on my drill press to match the gasket to the combustion chamber (I
matched the liner also). To do that on the stock gasket you have to
play games with adding a copper wire.
-Darrell
On Tuesday, June 10, 2003, at 03:57 PM, JOHN DONNELLY wrote:
> Does anyone have any experiences with the solid copper head gaskets?
> Any
> torque issues? Leakage?
>
> Thanks!
> John in San Diego
> '67 TR4A IRS
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|