cam degreeing

[Mitchel Seff <ms6453@optonline.net>]

Hi all,
 I just spoke to the machine shop and explained how I set the cam. He 
said it is not correct. I set the cam to the suggested 113 degree at 
full intake at the front of the ramp where it first hits maxinum lift.. 
He said I should have used the same method as finding TDC. So actually 
if the lobe sustains full intake for an additional 8 degrees I should 
find the center of the lift duration.
Any comments.

-- 
Mitch Seff
Oceanside, N.Y.
75 TR6
http://www.angelfire.com/ny4/triumph5/ 

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive