Randal,
I think that you may have hit upon the problem that I am having. You mention
that the last bend, on the stem before the mirror, was parallel to the base.
Well, mine is different. The last bend drops 15-20 degrees below a line
drawn parallel with the base. Was there another style mirror/base
configuration manufactured at the same time.
The odd thing is that the "later" style mirror that I have was the same way,
I broke off the last length of the small bend on the stem, trying bend it
parallel with the base. I re-drilled the ball and epoxied it in place and it
works fine, I may end up doing the same thing with this mirror unless someone
comes up with a better idea.
Any ideas gratefully accepted.
Gary Bouffard
59 TR3A TS58399
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|