Gotta love this list !
Thanx, Jim.
Stan
>
> From: "Jim Davis" <jdavis344@directvinternet.com>
> Date: 2003/01/21 Tue PM 08:24:56 EST
> To: <stantr6@bellsouth.net>,
> <triumphs@autox.team.net>
> Subject: RE: TR6 Soft Top Webbing
>
> Stan,
> I didn't want to give out my dimensions for fear they are not exactly
> right for their top, but the following are the distances between bows on
> my TR6 tops starting from the rear forward: 17 1/4",9 5/8",12". The
> measurements were taken from the center of the webbing, beginning at
> where the webbing enters the slot on the rear stiffener and then to the
> center of the metal plates that are riveted to the bows. The top frame
> was securely latched in the front to the windshield when I made my
> measurements.
> Note that there are probably minor variances in each car, but these
> dimensions should be very close.
>
> Hope this helps,
> Jim Davis
> Fortson, GA
> CF38690UO
> CF37325U
>
>
> List,
> When I got my '6, a relatively new top, with relatively new rips came
> with it.
> There were no web straps. Later, I learned they are needed, and I would
> guess they are needed to position the free rib of the frame so as to
> eliminate the need to pull so hard the top rips, as DPO had done ! I
> now have a web kit to be installed when the frame-off gets there.
>
> For those of us with nothing to go by, could someone please measure the
> various distances between the ribs where the webbing is anchored to the
> ribs. Again, this is for a TR6.
>
> Thanx in advance,
> Stan
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|