I pulled my old lever shocks out of the box i had put them in after installing
the tube shock conversions.
i cleaned them up added oil, they seem to have equal resistance in the vice
when the arm is moved up and down; but and there is always a but: one arm has
a very slight hitch when the arm aproaches the upper limit. I am not sure if
this is a concern.
Is it a good idea to take the shock valve out to check for sludge build up.
going back to the way things were supposed to be
Al Salvatore
76tr6
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|